Introdução
The Zenbre SoundBank Z3 bluetooth speaker is built for portable music. If your device speaker is producing no sound, low audio or damage, replacing the internal speakers can restore its performance and make the device last longer, plus keeping it out of the landfill. This repair guide will provide you with a step by step process of removing and replacing the speakers from the device. Soldering skills are needed to remove and replace the speaker, likely resolving problems of sound performance or broken speakers.
Ferramentas
-
-
Remove the four 4.5 mm silver Phillips screws that secure the plastic panel covering the motherboard.
-
Remove the plastic panel.
-
-
-
Desolder the speaker joints from the motherboard. Follow this How To Solder guide for help with desoldering.
-
-
-
Remove the speaker from the motherboard.
-
Remove the speaker ring.
-
Repeat Steps 5-7 with the other speaker.
-
To reassemble your device, follow these instructions in reverse order.
