Introdução

This is the Circuit Board Replacement for the Sennheiser HD 350BT this guide was specifically made if your having any trouble with any of the regarding Audio Failure, Physical Damage, No Power or Charging with a good battery would highly recommend this option if your experience one of these problems

  1. CWOkJQpYuAUDYsHF
    CWOkJQpYuAUDYsHF
    LTZtRZrTGiDUKY32
    • Remove the right ear pad.

  2. IyyPtHtpBtXjQt4f
    IyyPtHtpBtXjQt4f
    AAYi2YVZce1RV2CV
    tochCF4BsUR4L1Xc
    • Remove the seven Phillips screws securing the driver housing.

  3. N5ElYlRYp1llIQUV
    N5ElYlRYp1llIQUV
    hCLb3wEa2QickWfo
    • Remove all of the Phillips screws securing the motherboard.

    • Desolder and disconnect all motherboard connections.

Conclusão

To reassemble your device, follow the above steps in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting or ask our Answers community for help.

Joshua T

Membro desde: 25/09/25

207 Reputação

0 comentários