SAFFUN Wireless N64 Controller Back Plate Replacement

Escrito Por: Blake
  • Comentários: 0
SAFFUN Wireless N64 Controller Back Plate Replacement

Dificuldade

Easy

Passos

4

Tempo necessário

10 - 15 minutes

Introdução

Use this guide to remove the backplate from the SAFFUN Wireless N64 Controller.

  1. 1URhPUQfEtQohHLP

    • Before you begin, make sure the controller is disconnected and the LED indicator light is off.

  2. CRhmOFEINPcIf1Ij
    CRhmOFEINPcIf1Ij
    QDBA3B6XQkRemFdJ

    • Use a Phillips #1 screwdriver to remove the seven 9.3 mm screws from the backplate.

  3. DbIEQB6wCbrMjUYE
    DbIEQB6wCbrMjUYE
    J2jJN1cRtOPli5vN

    • Use a Phillips #1 screwdriver to remove the two 9.3 mm screws.

    • Use a screwdriver with a shaft length of at least 60 mm to reach the deep-set screws.

  4. XfctiaDICinM6WqN
    XfctiaDICinM6WqN
    2RtcNInWKkJlHsmM
    jJNZCgkmeInJDhoX

    • Slide an opening pick along the edge of the rear cover to release the clips.

    • Gently remove the back plate from the controller.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

Blake

Membro desde: 23/09/25

109 Reputação

0 comentários