PAPAISON Adjustable Inline Skates Cuff Buckle Replacement With Screws

Escrito Por: Johnnie B.

Comentários: 0

PAPAISON Adjustable Inline Skates Cuff Buckle Replacement With Screws

Dificuldade

Moderate

Passos

Tempo necessário

15 - 30 minutes

Introdução

Are you having issues reattaching your cuff buckle? Did your replacement cuff buckle come with screws? This guide will show you how to reattach the cuff buckle on your PAPASION A306S with screws.

Ferramentas

Passo 1

Place the skate on a flat surface.

Passo 2

Locate the rivets on each side of the cuff buckle.
There should be 3 rivets in total.

Passo 3

Insert Pozidriv PZ2 screwdriver into the back of each rivet and twist until the rivet is shaved down enough to pop out. Repeat as needed.
Apply heavy pressure.
If there are issues removing rivets, use a power drill with an 11/32 inch bit.
If using a power drill for this process, avoid loose clothing, and tie back hair. Wear safety goggles for additional protection.

Passo 4

Stripping the rivets will produce metal shavings and dust. Use caution and dispose of them in the trash.

Passo 5

Remove the plastic part of the cuff buckle with the attached cuff and discard.

Passo 6

Your skate will look like this once they are removed. There are two ways to attach the new cuff buckle:
If your new cuff buckle comes with rivets, please use this guide.
If your new cuff buckle comes with screws, please use this guide.

Passo 7

Place the skate on a flat surface.
Place the 11 mm washer on the inside of the skate, aligned with the opening.

Passo 8

Align the cuff buckle on the outside with the corresponding holes.

Passo 9

Insert the 8.5 mm screw into a hole on the outside of the skate.
Insert a Phillips #0 screwdriver into the 8.5 mm screw from the outside and turn it until it's tight.
Avoid overtightening the screw, as this can make future repairs more difficult.