Logitech Webcam Pro 9000 USB Connection Replacement

Escrito Por: Cory Davis
  • Comentários: 1
Logitech Webcam Pro 9000 USB Connection Replacement

Dificuldade

Difficult

Passos

4

Tempo necessário

No estimate

Introdução

  1. AeyHbr6H4nTMxf6O
    AeyHbr6H4nTMxf6O
    DhnZHIrmxAVHryCX

    • Remove the two 8 mm Phillips #0 screws on the back cover.

    • The motherboard connects the two covers together. DO NOT separate the two yet.

    • There is a button that loosens as the Phillips screws are removed. Don't be alarmed if it falls out.

  2. bRSDmuJFSaSPpcbC
    bRSDmuJFSaSPpcbC
    CyuYqB4l6O2RlZXR

    • Remove the four 6mm Phillips #0 screws connecting the motherboard and front cover.

    • DO NOT detach the wire connecting the motherboard to the front cover.

  3. gSPMEa51BCXUvZ5l
    gSPMEa51BCXUvZ5l
    5dnUiAkmTJDNnMVB

    • Use tweezers to grasp the white wire connector on the back of the motherboard.

    • Wiggle the connector back and forth to remove it from the socket.

  4. pF1f3XHpmm13jGSY
    pF1f3XHpmm13jGSY
    a2krSYUyQVrwZJoR

    • Desolder the joint on the front of the motherboard to completely detach the USB cable.

    • Follow this link to learn how to properly solder and desolder your parts.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

Cory Davis

Membro desde: 14/04/13

236 Reputação

Um comentário

what is the connector called

Anirudh Krishnan -