Kodak S100 EF Flash Replacement

Escrito Por: Nick
  • Comentários: 0
Kodak S100 EF Flash Replacement

Dificuldade

Difficult

Passos

4

Tempo necessário

30 minutes

Introdução

To start, the Front Cover Teardown guide must be used. Later, soldering guides will be used.

  1. Oa3ZhYJkYYsQgYHK

    • Have the camera facing upwards and the flash closest to you.

    • Unscrew the two 6.2 mm Phillips screws on the top half of the camera.

  2. f54aXxutyCxkIQ1m

    • Flip the camera over to the other side-with flash farthest from you.

    • Unscrew top two 6.2mm Phillips screws on this side.

  3. i2qSnsMJ6E2ctqsW

    • Turn the camera so the bottom is facing up with the front-facing away.

    • Unscrew the 6.2mm Phillips screw on the top right.

    • The front cover is now unscrewed and should be lifted evenly and removed.

  4. VjYRDqTQZ3ciKnNm

    • Once the front cover is off, desolder the connections at both ends of the flash.

    • If unfamiliar with soldering, refer to the guide Como soldar e dessoldar contatos

Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

Nick

Membro desde: 26/04/11

4 Reputação

0 comentários