Kenmore SpotLite KW2001 Power Cord Replacement

Escrito Por: Christian Sterba
  • Comentários: 0
Kenmore SpotLite KW2001 Power Cord Replacement

Dificuldade

Easy

Passos

10

Tempo necessário

10 - 15 minutes

Introdução

In this guide, we will show you step by step how to replace the power cord on the Kenmore SpotLite KW2001. This guide includes the disassembly process. If there is a hole in the wire or the wire is faulty, this guide will go over how to fix those issues.

  1. HIDAOeo5fMWUPPs5
    HIDAOeo5fMWUPPs5
    LpIBQxVO4OgHBOm5
    KLT1ah5MMPVZDhS3

    • Remove the clean water tank by lifting upwards and set it aside.

  2. Q6BbejBTlJeRWc6E
    Q6BbejBTlJeRWc6E
    uAxGGvJLJbFXUg2K
    kRsNp6DFMegFlMot

    • Remove the dirty water tank by lifting upwards to access the inside of the vacuum.

  3. XNbsqGOjF42fwAUf
    XNbsqGOjF42fwAUf
    H61jnZs2hely2JjS
    OOTetOS5D5rKqkNN

    • Remove the four 16 mm Phillips #2 screws that secure the lower case.

    • Use a long Phillips #2 screwdriver for easy removal of the screw in the upper right.

  4. BOc2chpDQFZIfGLc
    BOc2chpDQFZIfGLc
    IsexHDonsyEalLVS
    FIvlXqKwVMkoAkWq

    • Lift the handle upwards, and the bottom piece should come up with it.

  5. U1IJOX4enb14nkav
    U1IJOX4enb14nkav
    DOcwdbe3SqEpIJnd
    NNOGpwG1oI2JLGJ1

    • Remove the five 16 mm Phillips #1 screws that secure the lower case.

    • Remove the white hose by lifting upwards.

  6. VCUeZ22EhweS4fny
    VCUeZ22EhweS4fny
    Eo5SDPdOT5nuNrUM
    6dBmHK1LLX12GChw

    • Disconnect the power cord inside.

    • Remove the power button from the cartridge along with its wires.

  7. UZITPfZJVdBM1F5N
    UZITPfZJVdBM1F5N
    TTq5QR2VlZvXLBs1
    rFHyRPbrcldPTIwE

    • Take apart the power button to access the wires.

    • Remove the clear plastic covering from the white wire.

    • Repeat for the black wire

    • Use tweezers if necessary.

  8. pQ32QfU63BV5pbmX
    pQ32QfU63BV5pbmX
    o4ALOfSUDuhNQyT2
    NAsOILaHnK5wkbOU

    • Disconnect both wires.

    • Push down on the protruding metal on the black wire and pull to remove.

    • Repeat for the white wire.

    • Separate the plug from its covering.

  9. FuMwuPoLqOOxMyPf
    FuMwuPoLqOOxMyPf
    ywJ5yCkLXWs2lExB
    GCeBCVe5HZTRpCSp

    • Disconnect the white wire.

    • Disconnect the two black wires.

  10. 5g1NRApIPa6AXrNX
    5g1NRApIPa6AXrNX
    OBLag4HiyxUGkwBR
    adaVsQQdAChGcDKZ

    • Remove the cord.

    • Rotate the two handles inwards and remove the power cord.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

Christian Sterba

Membro desde: 15/09/25

133 Reputação

0 comentários