Introdução
In this guide we will go over how to replace the hose on the Kenmore Spotlite KW2001. This guide provides the disassembly process. If there is a hole or a clog in the hose, this guide will help to resolve these issues along with one step of the assembly process that may be tricky.
Ferramentas
Peças
-
-
Unscrew the two 10 mm Phillips #1 screws on the spray nozzle and set them aside with the plastic covering and plastic switch.
-
-
-
Remove the ¾ hose clamp using hose clamp pliers and pop the spray mechanism out of the water hose.
-
-
-
Detach the hose from the spray nozzle with a metal spudger and pull the water hose out of it.
-
-
-
Pull out the dirty water tank and use the same screwdriver to remove the remaining 13.5 mm Phillips #1 screw.
-
-
-
Pull the hose off the Kenmore Spotlite KW2001 and pull the water hose through until the hose is separated.
-
To reassemble your device, follow the above steps in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting or ask our Answers community for help.
