Introdução
If your GameSir Nova Lite controller’s haptic motors, otherwise known as rumble motors, are not functioning or are damaged, this guide will show you how to replace them. The repair takes approximately 5-10 minutes. The battery will be removed in this guide for safety purposes, and this repair requires a soldering iron.
-
-
Turn your controller so that the back of the controller is facing you.
-
Remove all six 9 mm-long Phillips #1 screws securing the back plate.
-
-
-
Insert an opening tool in the seam between the back and front case.
-
Insert iFixit Opening Picks around the controller to help keep the front and separated.
-
Slowly slide the tool around the controller until the two halves of the controller come apart.
-
-
-
Lay the controller down so that the motherboard and battery are facing you.
-
Grasp the white battery connector with blunt tweezers, and gently pull it out of its socket.
-
To reassemble your device, follow these instructions in reverse order. (You may need more solder to reassemble your device.)
