GameSir Cyclone 2 Top Cover Replacement

Escrito Por: Ross Debortoli
  • Comentários: 0
GameSir Cyclone 2 Top Cover Replacement

Dificuldade

Moderate

Passos

4

Tempo necessário

5 - 10 minutes

Introdução

Follow this guide if you need to remove the faceplate of your GameSir Cyclone 2. You may need to replace the faceplate or access the internals of your controller.

  1. ThaKjTxgJTDrniuG
    ThaKjTxgJTDrniuG
    llgJCn3A61hDtpSq
    OjSn2oUcERRKJcJk

    • Use a T6 Torx to remove seven screws from the bottom of the controller.

    • The last screw is under the sticker. Lift the sticker with tweezers, then then remove the final screw.

  2. 6jkhrKTUpXsXaQ6Z

    • The two larger screws belong on the top two sockets of the controller

  3. WDQCwrdoDBjDx1uW

    • The remaining five sockets in these locations

  4. euvnAXorXLUp5tDN
    euvnAXorXLUp5tDN
    cAKKtlDlSFJE6PdF

    • The front plate should pop with minimal force with the D-Pad and action buttons becoming loose as well.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

Ross Debortoli

Membro desde: 17/10/25

325 Reputação

0 comentários