Alcatel Go Flip 3 Wi-Fi/Bluetooth Chip Replacement

Place a fingernail or opening tool into the notch on the back panel of the phone.

Pry upwards to remove the back panel.

Remove the battery by lifting it up from the small indent.

Remove the nine 1 mm screws from the midframe using a Phillips #00 screwdriver.

Use a spudger to pry the midframe away from the phone.

Use a spudger to disconnect the video cable from the motherboard.

Use a spudger to pry the motherboard out of the phone.

Desolder the Wi-Fi/Bluetooth chip from the motherboard.