iPhone 6 Plus Vibrator Replacement

Escrito Por: Walter Galan
  • Comentários: 0
iPhone 6 Plus Vibrator Replacement

Dificuldade

Moderate

Passos

5

Tempo necessário

No estimate

Introdução

Prereq only, battery removed.

  1. fByMW4iDWLV6YTeR

    • Pry the vibrator connector cable up from its socket on the logic board with the flat end of a spudger.

  2. xkdDKKEKPSYDamfO
    xkdDKKEKPSYDamfO
    AvpyM1CUmFrra4nJ

    • Use the tip of a spudger to disconnect the interconnect antenna cable from its socket on the logic board.

  3. BRt1j2DVm2rlVOwo
    BRt1j2DVm2rlVOwo
    nFZwSG1ANwZHcAoj

    • Grasp the interconnect antenna cable with a pair of tweezers and carefully deroute it from its channel on the speaker assembly.

  4. lESjCMISLfbdAyhu

    • Remove the two 2.5 mm Phillips #00 screws securing the vibrator to the rear case.

  5. xoZCNUTsdKb2BskA

    • Lift and remove the vibrator out of the iPhone.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

Walter Galan

708121 Reputação

0 comentários