Introdução
-
-
Use a JIS 00 screwdriver to remove the two 1.8 mm‑long screws securing the left logic board buffer.
-
-
-
Remove the two screws securing the LiDAR cover:
-
One 1.7 mm‑long JIS 00 screw
-
One 4.8 mm‑long standoff screw
-
-
-
Use the point of a spudger to pry up a corner of the LiDAR module.
-
Use your fingers to remove the LiDAR module.
-
Conclusão
To reassemble your device, follow these instructions in reverse order.
