iPhone 17 Pro Max Front Sensors Removal

Escrito Por: Spencer Day
  • Comentários: 0
iPhone 17 Pro Max Front Sensors Removal

Dificuldade

Moderate

Passos

5

Tempo necessário

No estimate

Introdução

This guide shows how to remove the front sensors for an iPhone 17 Pro Max.

  1. f3njSOcbI56OuwcA
    f3njSOcbI56OuwcA
    bcLLuXdamRK6MaIX

    • If your replacement screen doesn't have front sensors installed, follow the next five steps to remove them.

    • Use a tri‑point Y000 screwdriver to remove the two 1.0 mm‑long front sensors screws.

  2. xPI1lBR3kyxGwoUE
    xPI1lBR3kyxGwoUE
    cV2pqwkaGaGM2gTN

    • Remove the front sensors bracket.

  3. J3TyHg5YoGmIhPfH

    • Use a hair dryer or heat gun to heat the front sensors.

    • You can heat the sensor directly or heat its corresponding spot on the front of the screen.

  4. SwdLSE2ZZGfrGSFt
    SwdLSE2ZZGfrGSFt
    fGMIMQSIWQLMmghc
    ZQPMb21yMxjyK3vy

    • The front sensors are very fragile and can easily rip—be very gentle while removing them. If you're having trouble, apply more heat and try again.

    • Use the point of a spudger to pry up both front sensors.

    • Pry on the tab under the sensors—not the sensors themselves—or you may damage them.

  5. oJajADLGbdr2RBSp
    oJajADLGbdr2RBSp
    E2IEVm2SkryGINeA
    DHqNMZmVnDZ6xtFE

    • Insert the tip of an opening pick under the top right corner of the front sensors large, glued-down cable.

    • Slowly slide the pick under the cable and lift until you can grip it with your fingers.

    • Use your fingers to peel up the cable and remove the sensors.

Autor(a)

Spencer Day

Membro desde: 14/09/22

165254 Reputação

0 comentários