Introdução
-
-
Slide the tip of an opening pick along the top edge of the Taptic Engine to separate the plastic buffer strip adhered to it.
-
-
-
Use a JIS 00 screwdriver to remove the six screws securing the loudspeaker:
-
Two 2.7 mm‑long screws
-
Two 2.0 mm‑long screws
-
One 1.5 mm‑long screw
-
One 1.5 mm‑long screw attached to the bottom edge
-
-
-
Tilt the top edge of the loudspeaker out of its recess.
-
Slowly pull the loudspeaker away from the frame to release the adhesive.
-
Remove the loudspeaker.
-
Conclusão
To reassemble your device, follow these instructions in reverse order.
