Introdução
-
-
Align the bottom edge of the loudspeaker with the frame and lay it in its recess.
-
Make sure the bottom-right screw tab seats properly against the frame. Gently bend it if it's out of place.
-
Use your finger to press down on the loudspeaker until it clicks in place.
-
-
-
Use a JIS 00 screwdriver to install the six loudspeaker screws:
-
Two 2.7 mm‑long screws
-
Two 2.0 mm‑long screws
-
One 1.5 mm‑long screw
-
One 1.5 mm‑long screw attached to the bottom edge of the iPhone frame
-
-
-
Use your fingers or a spudger to press the buffer strip back onto the top edge of the Taptic Engine.
-
Conclusão
To reassemble your device, follow these instructions in reverse order.
