iPhone 16e Taptic Engine Installation

Escrito Por: Alex Diaz-Kokaisl
  • Comentários: 0
iPhone 16e Taptic Engine Installation

Dificuldade

Moderate

Passos

5

Tempo necessário

No estimate

Introdução

  1. MBuMhDSOBpOZ1Qs3
    MBuMhDSOBpOZ1Qs3
    PqrxArYjQ4RZv5uh

    • Place the Taptic Engine into its slot in the frame.

  2. ilITQwvf2kkMSCe1
    ilITQwvf2kkMSCe1
    jTNjG2H3guefUpto

    • Use a Phillips screwdriver to install the 2.1 mm‑long screw securing the Taptic Engine.

  3. wHhuEHATXmSkfFeN

    • Use the flat end of a spudger to connect the Taptic Engine press connector.

  4. hBhMcKSdI3W3sKFd
    hBhMcKSdI3W3sKFd
    ic56pJUlDsygt2uA

    • Place the cover over the Taptic Engine connector.

  5. A2c1kj3Zr3kBQoG1
    A2c1kj3Zr3kBQoG1
    YsO3DantUj6C2fkF

    • Use a Phillips screwdriver to install the two 2.2 mm‑long screws securing the Taptic Engine connector cover.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

Alex Diaz-Kokaisl

Membro desde: 16/01/22

227430 Reputação

0 comentários