iPhone 16 Pro Max Charge Port Installation

Escrito Por: Arthur Shi
  • Comentários: 0
iPhone 16 Pro Max Charge Port Installation

Dificuldade

Moderate

Passos

5

Tempo necessário

1 - 3 hours

Introdução

Installation steps for the charge port in the iPhone 16 Pro Max.

  1. OCNJuEwpYydfywEK

    • Make sure the two black prongs are standing straight up. If they were bent when you removed the charge port, use the point of a spudger to carefully straighten them.

  2. BvZDcVUL563MUxIf
    BvZDcVUL563MUxIf
    nTAwhTcBXAlLLkHO

    • Angle the bottom edge of the charge port into its recess and press the charge port in place.

  3. EZgNZglYyRS2UeuB

    • Use a pentalobe P2 driver to temporarily install the two external pentalobe screws.

    • This pulls the loose charge port into alignment.

  4. FbCfvNUMQ4t3QhRI
    FbCfvNUMQ4t3QhRI
    546mX3gkoKJ4d6QL
    S6Fq6NrQlsK5Fch1

    • Use a Phillips screwdriver to install the two 3.3 mm‑long screws securing the charge port to the frame.

    • Be careful not to press the screwdriver against the battery.

  5. QqrRwprgNtE1gMjm

    • Use a pentalobe P2 driver to remove the two temporary pentalobe screws.

    • If you forget to remove these screws, the back glass won't install properly.

Autor(a)

Arthur Shi

Membro desde: 03/01/18

326111 Reputação

0 comentários