Introdução
Reassembly steps to install the front camera assembly in the iPhone 16 Pro.
-
-
Lay the front camera assembly in its recess.
-
Gently tuck the camera flex cables into the gap between the rear camera assembly and the earpiece speaker assembly.
-
-
-
Use your fingers or a spudger to push the front camera flex cables up towards the earpiece speaker, then tuck them in the gap between the earpiece speaker and the logic board.
-
-
-
Use your finger or a spudger to connect the two front camera assembly press connectors, located on the top edge of the logic board.
-
-
-
Use your finger or a spudger to connect the earpiece speaker and 5G mmWave antenna (US models only) press connectors, located on the top right corner of the logic board.
-
