iPhone 16 Plus Rear Cameras Installation

Escrito Por: Nick Schultz
  • Comentários: 0
iPhone 16 Plus Rear Cameras Installation

Dificuldade

Moderate

Passos

4

Tempo necessário

No estimate

Introdução

Reassembly steps for the rear cameras in the iPhone 16 Plus.

  1. vCduZXXvMVdrorEs
    vCduZXXvMVdrorEs
    uyukiLvxPBvAegnI
    djxH2ZZPPOJbmlLu

    • Align the rear cameras with their screw posts and place them in the frame.

    • Make sure the lower camera cable is routed in the channel above the battery.

  2. r6SgeTKaJlHNBXJX
    r6SgeTKaJlHNBXJX
    PMaeKVD4dmrAtNPe

    • Use a Phillips screwdriver to install the three screws securing the rear cameras:

    • One 2.4 mm‑long screw

    • One 3.2 mm‑long screw

    • One 4.7 mm‑long screw

  3. CPYIICSvyaKmX1In
    CPYIICSvyaKmX1In
    IYidHImMM3kTLm2U
    4Vv2yBScfk1aORad

    • Use your finger or a spudger to connect the two rear camera press connectors, located in the bottom left corner of the logic board.

  4. tSmEruUlilNgAocR
    tSmEruUlilNgAocR
    ICpXLKYGPAryZcUG
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

Nick Schultz

Membro desde: 24/03/24

45909 Reputação

0 comentários