Introdução
Reassembly steps for the 5G mmWave antenna in the iPhone 16 Plus. This antenna is only in USA iPhone 16 Plus models (A3082).
-
-
If your replacement part doesn't include new adhesive, use a 5 mm x 16 mm strip of thin, double-sided tape to secure the antenna to the earpiece speaker.
-
-
-
Slide the new antenna underneath the front camera cables and make sure its cable routes in the channel above the logic board.
-
Connect the antenna press connector, and press the antenna onto the earpiece speaker to adhere it.
-
Conclusão
To reassemble your phone, follow these instructions in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting, or ask our iPhone 16 Plus Answers Community for help.
