iPad 10 Chip ID

Escrito Por: Arthur Shi
Publicado em: 02/12/22
  • Comentários: 5

iPad 10 Chip ID

Publicado em: 02/12/22

Teardown

Introdução

This guide contains a selection of photos and chip identification summary for the iPad 10's logic board.

Check out our iPad 10 teardown for more details.

Special thanks to community member CChin for his contribution!

  1. NDIAgW3LqUNr6qeB
    NDIAgW3LqUNr6qeB
    5NKeEm4msqqsAQfP

    • Chip ID part 1:

    • Apple APL1W01/339S00803 A14 hexa-core applications processor layered under SK hynix H9HKNNNCRMMVFR-NEH likely 4 GB LPDDR4X SDRAM memory

    • Kioxia K5A2JW30I8TAI2217 ? 64 GB NAND flash

    • Apple APL1094/343S00564 power management

    • Apple APL1099/343S00565 power management

    • Texas Instruments SN2610A0 battery charger

    • Broadcom BCM15957A0 touchscreen controller

    • Texas Instruments CD3217B13 USB type-C controller

    Hi bos, may i know the code for mosfet on this ipad?

    Hairul Aiman -

    Does anyone know what the component is to the directly BELOW the Green outline

    (Apple APL1099/343S00565 power management)

    It is the larger size, SQUARE light Grey component, approx 5mm x 5mm in size. Only has two pads on bottom. I do not know what this component is, appears to be a smd inductor coil but I would like to find replacement.

    On another diagram online, it showed it was location x20129, not sure if that is helpful at all.

    Thank you.

    Shawn Z -

  2. MIYEjTab3gFn6nTq

    • Chip ID part 2:

    • Analog Devices MAX98709B audio amplifier

    • Winbond W25Q80DV 1 MB serial NOR flash memory

    • Apple/Cirrus Logic 343S00377 power management

    • Likely Texas Instruments USB 2.0 dual repeater

    • Texas Instruments LM3638 backlight LED driver

    • Texas Instruments TPS61230A 6 A / 5 V step-up converter

    • Texas Instruments SN1705004A0 DC-DC converter (likely)

  3. GZGi4Nn3fPaYFQdv

    • Chip ID part 3:

    • Texas Instruments TPD4S311A USB type-C port protector

    • Texas Instruments TVS2200 surge protection

    • Nexperia 74AVC1T45 dual-supply voltage level translator/transceiver

    • Nexperia LSF0101 1-bit multi-voltage level translator

  4. JUpdIYRrWI5m2X2e

    • Chip ID part 4 - connectivity:

    • NXP Semiconductor SN210 NFC controller w/ secure element

    • USI 339S01015 WiFi/Bluetooth module

  5. QxUUjkpfLAJBdWvU

    • Chip ID part 5 - sensors:

    • Bosch Sensortec BMI282 6-axis accelerometer/gyroscope

    • Bosch Sensortec pressure sensor

    • Alps hall sensor

Autor(a)

Arthur Shi

Membro desde: 03/01/18

326108 Reputação

3 comentários

this iPad get water damage and it would just turn on apple logo and turn itself off,

Neclus ADams -

keep in mind l did a factory restore or tried to install the operating system and it didn't work

Neclus ADams -

My ipad is at dead battery, Im trying to charge it but its not working. Only showing the charger logo and a low battery icon. What do you think is the problem? The repair man says its the charging IC and the eemc, can somebody tell me what does eemc means?

Mike -