Yujin Robot iCLEBO Arte Battery Replacement Guide

Escrito Por: Trent Bingel
  • Comentários: 1
Yujin Robot iCLEBO Arte Battery Replacement Guide

Dificuldade

Very easy

Passos

4

Tempo necessário

5 minutes

Introdução

Replacing the battery is a quick and easy fix if your robot exhibits the symptoms shown in the accompanying troubleshooting section.

  1. HIQGDGbINJ3sVVZo
    HIQGDGbINJ3sVVZo
    oYf1QmpCRfbLxuhE
    xQClJOkR3X2XMpXr

    • Locate and unscrew the two 15mm screws with a Phillips #2 screwdriver.

  2. IUtXyeh16r5SmFa6
    IUtXyeh16r5SmFa6
    haRAiDDULnPBRkWy
    AYV1fKhABIPERbKc

    • Remove both screws shown by rotating them counter-clockwise.

  3. ZQClZnjAc21RFJIV

    • Remove the battery compartment's lid.

  4. WfNlpghB2bSCnhDx
    WfNlpghB2bSCnhDx
    RkqX3r5LylPvmEQk

    • Slide the battery out, and disconnect it from the robot by squeezing the tab on the power cable.

    • If you pull too hard on the connector without properly squeezing the tab, something will break.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

Trent Bingel

Membro desde: 28/02/17

437 Reputação

Um comentário

Tried 2 different new batteries and still won’t charge

desrn55 -