XBOX Controller S Shell Replacement

Escrito Por: WyattGripp
  • Comentários: 0
XBOX Controller S Shell Replacement

Dificuldade

Moderate

Passos

2

Tempo necessário

10 minutes

Introdução

If your Xbox Controller S shell is cracked, use this guide to replace it. The shell is what protects the circuit board from damage.

  1. 121kEMLvjxVBF4bo

    • Remove the seven 9.4 mm screws on the back of the controller using a Phillips #00 screwdriver.

    • One screw is hidden behind the sticker on the back of the controller. Peel that sticker back and remove that screw as well.

  2. lAgWoHOiB5qAPtCg
    lAgWoHOiB5qAPtCg
    3iqVdDUYDQdqJgrS
    TwniZSFde4dELyB6

    • Keep the controller facing down to prevent components from falling out.

    • Remove the back shell.

    • Flip the controller over and remove the front shell.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

WyattGripp

Membro desde: 24/09/25

322 Reputação

0 comentários