Introdução
The hose that assists in moving water from the reservoir to the pick can get a build up of minerals in it when not cleaned on a regular basis. The hose should be cleaned about once a month. Here are the steps to get to the hose and then clean it.
Ferramentas
-
-
Depress the tip eject button and remove the tip.
-
Use an opening tool to pry off the tip rotator.
-
-
-
Use a Phillips #0 screwdriver to remove the two screws beneath the eject button assembly.
-
Remove the water reservoir and remove the two Phillips #0 screws toward the bottom of the device.
-
-
-
Insert the flat end of a spudger into the seam between the front and rear case and gently begin to pry the two halves of the case apart.
-
Disconnect the hose from the right side of the device and fully separate the two halves of the case apart.
-
-
-
Use a Phillips #0 screwdriver to remove the two screws securing the hose outtake.
-
Remove the hose.
-
To reassemble your device, follow these instructions in reverse order.
