Introdução
In the process of caring for and cleaning your Waterpik Cordless Advanced 2.0 WP-580, the o-ring that is at the top of the device holding the cap may become broken. Here are the steps to replace it.
Ferramentas
-
-
Depress the tip eject button and remove the tip.
-
Use an opening tool to pry off the tip rotator.
-
-
-
Use a Phillips #0 screwdriver to remove the two screws beneath the eject button assembly.
-
Remove the water reservoir.
-
Remove the two Phillips #0 screws toward the bottom of the device.
-
-
-
Insert the flat end of a spudger into the seam between the front and rear case and gently begin to pry the two halves apart.
-
Disconnect the hose from the right side of the device and fully separate the two halves.
-
To reassemble your device, follow these instructions in reverse order.
