Introdução
In order to replace individual parts in your Turtle Beach Stealth Ultra controller (model number TBS-0710-05), you will need to detach the motherboard from the front plate. The motherboard is responsible for connecting user inputs with the software. Every controller function revolves around it. While following this guide, be cautious not to scratch or otherwise damage the motherboard. Follow these steps to fix it.
Additional Resources:
Stealth Ultra Controller Support Site
Video on Turtle Beach Stealth Ultra Disassembly and Reassembly
Ferramentas
-
-
Remove the sticker on the back of the plate.
-
Remove the 10 mm screws from the back plate using a Phillips #00 screwdriver.
-
-
-
Use an iFixit opening tool to pry the front button plate and analog stick plate off.
-
Use a Phillips #00 screwdriver to remove the screws from the front plate on both sides of the controller.
-
-
-
Use a Phillips #00 screwdriver to remove the 10 mm screws connecting the handles to the controller frame.
-
To reassemble your device, follow these instructions in reverse order.
