Turtle Beach Recon Cloud Back Casing Replacement

Escrito Por: Alyssa Davis
  • Comentários: 0
Turtle Beach Recon Cloud Back Casing Replacement

Dificuldade

Moderate

Passos

3

Tempo necessário

5 - 8 minutes

Introdução

If you need to access the inner components or your back casing has been damaged, this guide will help. This guide will show you how to remove the backing casing of the Turtle Beach Recon Cloud controller.

  1. BwprvVFvXjWIWPFq
    BwprvVFvXjWIWPFq
    AUUFLVtgVbXkHA5O

    • Use a Phillips #00 screwdriver to remove 7 screws from the back casing.

    • The 2 inner screws are hidden under the Turtle Beach sticker.

    • The two screws at the bottom of the grips are countersunk, so you may need a 1/4" extender if your driver doesn’t fit.

  2. HqiUpcnCN616ZmUx
    HqiUpcnCN616ZmUx
    RVZLttXX2C4skBHQ

    • Use the iFixit opening tool to wedge it between the inner grip and the casing to pry it off.

    • Do the same to the other inner grip.

    • Do not take off the outer grips as they have wiring attached to them.

  3. ItLwLVlwCHbWZFCt
    ItLwLVlwCHbWZFCt
    M3yTlEf1mbnbKLOi

    • Lift off the back casing.

Conclusão

To reassemble your device, follow these instructions in reverse order. Take your e-waste to an R2 or e-Stewards certified recycler.

Autor(a)

Alyssa Davis

Membro desde: 12/09/25

521 Reputação

0 comentários