The Claw "Claw" Replacement

Escrito Por: Alain Pierre
  • Comentários: 9
The Claw "Claw" Replacement

Dificuldade

Moderate

Passos

9

Tempo necessário

10 - 15 minutes

Introdução

If you are experiencing trouble with the claw or it does not seem to be opening or closing properly, it is possible that the claw itself is broken or damaged. This requires the user to open the claw device in order to access the mechanical claw. Follow this easy guide in order to properly and easily replace your claw.

  1. GTuc62nVePDMbnJN

    • Place The Claw machine in the up-right position with the control knobs facing you.

  2. GxocWhGFBg5LTPyx

    • Turn The Claw machine upside-down placing the top cover on the surface of your work area.

  3. iESkXIEAosG5pxHJ

    • Remove all ten 6mm phillips #1 screws underneath the top cover using your #1 phillips head screwdriver.

    • It is helpful to choose a clear, well lit work space. There are multiple tiny screws that are easy to lose.

  4. dHnuV4Scu5VRVsIQ

    • Turn The Claw machine back to the upright position with controls facing you.

  5. coKgwAxG6Zkp4ItJ

    • Remove the top cover of The Claw machine.

  6. jKjFQCJXTytZcrXY
    jKjFQCJXTytZcrXY
    THci4tMiksQnRy6b

    • Remove the ten 6 mm phillips #1 screws from the top flange.

  7. cAkCYdOvFRD6BsNr

    • Lift the flange upward and off to the side of the machine.

    • There is enough wire connecting the flange to the machine that you will not need to cut the wire. The flange can be moved off to the side of the machine while you are working.

    • Cutting or ripping out the wire will cause damage to the machine so try not to put much tension on the wire.

  8. 6xbQfasZuM6pWaJU

    • Once you have removed the top cover of the claw you can easily access the claw and you will see that the claw is attached by two small chains.

    • Locate the small rings that attach the chain to the plastic claw.

  9. lhMW354ypT3tQOFl

    • Using the precision tweezers or small needle nose pliers, gently widen the small rings enough so that they can be removed from the claw.

    • Replace the claw one ring at a time. The chain needs to be attached to the new claw in the same configuration. One side of the chain opens the claw and the other side is just a hanging support.

    My claw machine has only one of the chains attached when I opened the box. The claw does not open because that chain is not attached.

    Ronnie Crumpton -

    Addition to the above comment. The open chain is not attached to the gear box.

    Ronnie Crumpton -

Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

Alain Pierre

Membro desde: 22/03/16

1188 Reputação

7 comentários

Where do I buy a new grabber thing

Oliver Chew -

The 1st joystick that moves the claw forward and back doesn’t work.

Michelle Bianchini -

What if the chain won't go down as it deep as it used to be?

Mira DIP -

Can you reconnect the white cord in picture above in step 6 connecting the claw on top and bottom

Greg Sturges -

My chain fell off and I dont know how to fix

Kathellyn Da silva -

Porque la garra no sube ni baja +?

Pero a los lados si funciona!?

Gracias

BB᭄ᎷᎪQᎠᎬҒႮᎬ Bᴀʀʀɪᴏ᭄Bʀᴀᴠᴏ -

All my functions work except the claw will not open going down or up it remains closed at all times so the is no way to pick anything up and if the new claw is made the same way then I'm not sure it will work with a new one and none of these troubleshooting comments even come close to an explanation on a cause or fix other than buy a new one or buy a new claw

jody horton -