Sennheiser HD 350BT Ear Pads Replacement

Escrito Por: Arath
  • Comentários: 0
Sennheiser HD 350BT Ear Pads Replacement

Dificuldade

Easy

Passos

5

Tempo necessário

3 - 5 minutes

Introdução

Over time, the ear pads on your device will wear down, eventually to the point of no longer working as proper cushions. In this guide, we will show you how to properly remove and replace this part.

  1. IHimwUTcEPmPb2DU

    • Firmly grip the pads around the border of the rubber and the plastic.

  2. Q2GPWgsXAsWXILYE
    Q2GPWgsXAsWXILYE
    RvovkLmMDGGJpohj

    • Twist the earpad clockwise or counter clockwise.

    • Remove the ear pads.

  3. ZyKA2MCRFGELUnbr
    ZyKA2MCRFGELUnbr
    eRbWpygBB6GkOa4X

    • Look for a small groove where the main bulk of the plastic and the internal electronics of the device meet.

  4. TlmTNk4wZaAhfREA
    TlmTNk4wZaAhfREA
    pPDYmva66WlmvPBD

    • Carefully tuck the fabric flap around the edges of your earpads inside of the groove.

  5. EI6JvLKrijWrBSMX

    • You may have to hold the ends you place into the groove, as the flaps can be quite tight. Ensure that every edge of the earpad is in place.

Conclusão

Replacing the ear pads on Sennheiser HD 350BT headphones is pretty straight forward and simple. Following the steps to remove it would be the same to re-installing, but in reverse.

Autor(a)

Arath

Membro desde: 25/09/25

256 Reputação

0 comentários