Sanyo VPC-T850 Battery Replacement

Escrito Por: James Robinson
  • Comentários: 2
Sanyo VPC-T850 Battery Replacement

Dificuldade

Very easy

Passos

4

Tempo necessário

30 seconds - 1 minute

Introdução

If your camera is having trouble turning on, it is likely due to an issue with the battery. This guide will go through the steps needed to replace the battery of a Sanyo VPC-T850.

Warning: Always turn off the power before handling battery.

  1. j5CqKMxHray5NuZ5

    • Make sure the camera is powered off by pressing and holding the small, square button embedded in the top rim of the camera.

    jai le meme mais je n artive plus a l allumer et le viseur ne rentre plus comment je dois faire pour l allumer la bayerie ne reste pas fixe pouvez vous m aider en francais merci

    nadine Guchez -

    Bjr j aie le meme appareil photo sanyo 8i vpc-T850*megapixel je n arrive plus a l alummer et la naterie est charger a 100pourcents et elle ne reste pas fix pouvez vous m aider en ftancaismerci

    nadine Guchez -

  2. GESsPv1ytqrtngYr

    • Locate the hatch found on the bottom of the camera.

    • Open the hatch by gripping the small notch and sliding it outwards.

  3. S3cTRYxbLURFL3hS

    • Push the small, plastic arm out of the way to free the battery.

    • The battery is spring loaded and will pop out slightly when the arm is moved.

  4. Bch6bOnUekhsy4uW

    • Pull the battery out of the camera and close the hatch.

    • To reinsert, there is a triangle on the battery indicating which direction to slide it in.

Conclusão

To reassemble your device, follow these instructions in reverse order. Take your e-waste to an R2 or e-Stewards certified recycler.

Autor(a)

James Robinson

Membro desde: 27/10/15

459 Reputação

0 comentários