Ryobi Evercharge P714TH Filter Replacement

Escrito Por: Christopher Wilson
  • Comentários: 0
Ryobi Evercharge P714TH Filter Replacement

Dificuldade

Very easy

Passos

4

Tempo necessário

3 - 6 minutes

Introdução

A common reason the Ryobi Evercharge P714TH loses suction is a clogged filter.

This model is designed for easy filter maintenance—no tools are required. Regular cleaning keeps the vacuum performing at its best and extends its lifespan. You can also follow this guide to replace the filter, as it walks you through accessing it.

Replace the paper filter every 3–6 months, depending on use. Wash the mesh filter (screen assembly) as needed, and make sure it is completely dry before reassembly. Avoid using solvents on plastic parts, as they can damage the plastic.

Before you begin, make sure the vacuum is powered off and the battery is removed.

  1. L2BIZdeMEyqjGTCm
    L2BIZdeMEyqjGTCm
    NICRPf6X3CcEibed

    • Push the gray slider forward to unlock the locking tabs.

    • Remove the dust bin from the vacuum.

  2. nhZWvOchXpdbXCrb
    nhZWvOchXpdbXCrb
    ViABrTjMjtaKeDVM

    • Press the black tabs on the sides of the paper filter to release and remove it.

  3. 3nK4VkR26j6YXZuA
    3nK4VkR26j6YXZuA
    xTR6MCQFN4r62hDg

    • Reach into the dustbin and pull out the mesh filter.

    • The mesh filter is the one you can clean.

    • Do not clean the paper filter. That filter cannot be cleaned and needs to be replaced every 3-6 months.

  4. jUoacJ2laZrtPwFM
    jUoacJ2laZrtPwFM
    LBRN3XkBipLWGCXP

    • Tap the dust out of the mesh filter into the waste basket.

    • Use a cloth to wipe out any additional dirt and dust from the filter.

    • For a deep clean, rinse the filter with cold or lukewarm water. Do not use hot water as this may damage the filter. Wait 24 hours until the filter is completely dry before putting it back in the vacuum.

    • Reassembling the vacuum with the mesh filter still wet may damage it.

Conclusão

To reassemble the vaccuum, follow these instructions in reverse order.

Make sure the plastic nozzle is completely sealed or the vacuum will not power on.

Autor(a)

Christopher Wilson

Membro desde: 27/08/25

109 Reputação

0 comentários