Riddell Speedflex Football Helmet Visor Replacement

Escrito Por: Peyton Washburn
  • Comentários: 0
Riddell Speedflex Football Helmet Visor Replacement

Dificuldade

Moderate

Passos

6

Tempo necessário

5 - 8 minutes

Introdução

The Riddell SpeedFlex's visor plays a crucial role in ensuring its users' safety out on the football field. If you're experiencing any complications with Riddell Speedflex's visor, such as it feeling loose, constant slipping, or substantial damage like cracking, replacing the visor can be the solution to your device's malfunctioning.

This guide will provide you with a thorough explanation of the replacement process, with helpful photos along the way to make sure you are successful.

Before you begin, make sure to check the troubleshooting page to guarantee that the facemask needs replacement.

  1. yICasCHETsQh6ibZ
    yICasCHETsQh6ibZ
    Xti6ct6vXSUjO1Ex

    • Place your helmet on a flat, sturdy surface to ensure an easy removal and replacement process.

    • Flip the helmet over so that you can see the entire inner bowl of the helmet, as referenced in the provided photo.

  2. OqCeo3Z2NPhedf6n

    • Push the chinstrap aside.

    • It does not necessarily matter where, but we suggest downward.

    • Pushing the chinstrap aside helps the removal and replacement process in the long run.

  3. 6TJPCNPZoh2iDptn
    6TJPCNPZoh2iDptn
    cMicf5FZmDLHxWuX

    • With one hand, unscrew the black knob that is located by the facemask and visor.

    • Unscrew the knob on the other side, located in the same position.

  4. O4KSDEEGpjYFXlRI

    • With two fingers, pinch and separate (unclip) the visor clip attached to the facemask.

    • Be gentle, as the visor itself might slide and scratch up against the facemask.

  5. QdMnBDQFMZIhAJaF

    • Again, pinch and separate (unclip) the clip that is attached to the facemask.

    • For this one, be prepared for the visor to completely slip. Depending on the visor you have, it may stay put or slide. We suggest holding the visor as you remove the second clip.

  6. 5xAC5YbXqJFciZja
    5xAC5YbXqJFciZja
    BZuSLBmGLTw651Ai
    DpMkqeywwFwgSNDD

    • Hold the top-right corner of the visor and gently pull it through the upper opening of the facemask to remove it.

    • Sliding it through the top of the facemask reduces the risk of damage, as the visor is not designed to slide through the bottom.

Conclusão

To reassemble your device, follow these instructions in reverse order.

To ensure the quality of the replacement, try the helmet on and run your facemask through some testing.

Autor(a)

Peyton Washburn

Membro desde: 25/09/25

674 Reputação

0 comentários