ResMed AirSense 10 Air Intake Filter Replacement

Escrito Por: Jacey Cobb
  • Comentários: 5
ResMed AirSense 10 Air Intake Filter Replacement

Dificuldade

Very easy

Passos

2

Tempo necessário

2 minutes

Introdução

This guide will explain how to replace the air intake filter in the ResMed AirSense 10 ventilator. Regularly check the intake air filter to prevent the entry of dust and water. Replace the intake air filter every 6 months or if there are any damages or blockages to the filter.

  1. NhoxU1F4VSSclHdr
    NhoxU1F4VSSclHdr
    RrRWbLjAXOEfl3kr

    • The air filter cover is plastic mesh plate, on the same side as SD card holder.

    • Pry open the intake air filter cover on the bottom of the left side panel of the device.

    Can I get a new filter door? Email is lgrav@yahoo.com

    Lyle Grav -

  2. NCMLcOJowxNMYkMs
    NCMLcOJowxNMYkMs
    UyqCZYKYBbaJavyy

    • Remove the used air filter and inspect for damages or blockages.

    • Replace the air filter as needed.

    Which side should face the outside air?

    Lynne Clark -

    My air filters don't have a blue tinted side. So which side should face out?

    Valerie P -

Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

Jacey Cobb

Membro desde: 16/09/20

2477 Reputação

2 comentários

The filter has a smooth side and a fuzzy side. Which side goes against the cover? Or doesn't it matter? Thanks.

Barbara Pollack -

I’m wondering the same……

Just looked it up, fuzzy side should face outward.

Joanie K -