Replacing Sanyo VPC-X1200 Rear Buttons

Escrito Por: Anthony Giardina
  • Comentários: 0
Replacing Sanyo VPC-X1200 Rear Buttons

Dificuldade

Easy

Passos

3

Tempo necessário

5 minutes

Introdução

This is an easy guide to replacing the rear buttons on the Sanyo VPC-X1200.

  1. nWWunZCYDCOM4Tun
    nWWunZCYDCOM4Tun
    cWFjUCjaMKVyKjTR
    INNm3vJGe4yW3cNa

    • Remove the five case screws with a Phillips #00 Screwdriver.

    • Five 3.5mm Phillips Screws

  2. 3fs5LCDPf5yjEOMx

    • Gently lift up the back cover and set aside.

  3. tSoSlJxFsSNxEcfM

    • Use small plastic pry tool to gently remove rear button plate.

    • A heat gun may be used to soften the glue for easier removal.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

Anthony Giardina

Membro desde: 19/04/10

35 Reputação

0 comentários