Razer BlackWidow V3 Tenkeyless USB Cable/Back Panel Replacement

Escrito Por: elijah nwuha
  • Comentários: 1
Razer BlackWidow V3 Tenkeyless USB Cable/Back Panel Replacement

Dificuldade

Easy

Passos

6

Tempo necessário

10 minutes

Introdução

If you need to replace your back cover or clean the debris, access the back panel with this replacement guide. Since the back panel is the foundation of the keyboard, you can easily replace and clean your product if it is not functioning completely. For this guide, you will need a plastic opening tool and a Phillips #0 screwdriver head. You will not need to take any difficult steps.

  1. 5iO2muQOTbNJ3QUP
    5iO2muQOTbNJ3QUP
    GCyMPeyQfsDcM4QX

    • Before you begin, unplug the keyboard from your computer to prevent accidental damage.

    • Use a keycap puller to remove all keycaps.

  2. mAwU4ks12CougDTC

    • Remove the two 7.8 mm Phillips #0 screws on the lower edge of the face plate.

  3. 4xNZNcnVJyTSuaG3
    4xNZNcnVJyTSuaG3
    WHKIqHyQj3D6LAmO

    • Carefully separate the backplate from the face plate.

    • Take care not to strain the connected USB cable.

    • A plastic opening tool can be helpful to gently pry the pieces apart if needed.

    • Be patient and work slowly to avoid breaking any clips or the usb-connector.

  4. yZJSKPX3jNcMA56s
    yZJSKPX3jNcMA56s
    lVLJGPRb1WlgWQDc

    • Flip the face plate over and gently disconnect the white USB connector.

    • Pull on the connector, not the cable bundle.

  5. h1QZBVgRG5r63iVb
    h1QZBVgRG5r63iVb
    tJkiYK1ZgvYaw4ue
    reK3oUWlBlgcLWQu

    • Remove the two Phillips #0 screws.

    • Lift the flap and remove the USB cable.

  6. XjPScyBi5ttNcYVN

    • Optional: Clean out any dirt or debris.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

elijah nwuha

Membro desde: 20/02/25

133 Reputação

Um comentário

Do you know if its possible to buy the replacement cable?

Adam Diesl -