Introdução
This guide will show you how to replace the tuner on the Pyle PUKTEA22 23” Concert Ukulele.
The tuner module allows you to tune the instrument and adjust the audio controls.
Before replacing the tuner, check that the batteries are working and the tuner is plugged into the internal wires. If the batteries are working and the cables are plugged in, then replacement is necessary.
If the ukulele's built-in tuner is not working properly, you may need to replace it with a new one. Or, you may need to reach the internal wires to replace them because the connections to the tuner are faulty.
Before you begin, make sure to remove the two batteries from the compartment on the auxiliary port module. This will prevent any shorts or damage to the electronics in your ukulele.
Ferramentas
-
-
Use a Phillips #1 screwdriver to remove the 4 mm screw from the back plate on the tuner assembly.
-
-
-
Squeeze the locking tabs on the side of the white port.
-
Use a nylon spudger to push on alternating sides of the connector to "walk" it out of its socket.
-
To put in the new tuner, follow these instructions in reverse order. Take your e-waste to an R2 or e-Stewards certified recycler.
