Introdução
This guide will show you how to replace the auxiliary port on the Pyle PUKTEA22 23” Concert Ukulele.
The auxiliary port is an output jack that allows you to plug in the instrument to audio equipment, such as an amplifier. This enables the sound to be louder and transmitted through a speaker. Plugging the ukulele into the auxiliary port can also make recordings easier and produce clearer audio.
If the auxiliary port will not connect when you plug it into audio equipment, either the auxiliary port itself or the audio equipment is faulty. If the auxiliary port is the problem, you need to replace it with a new one.
Before replacing the auxiliary port, remove the batteries for safety and to reduce the possibility of damage to your ukulele.
Ferramentas
-
-
Use a Phillips #1 screwdriver to remove the four 4 mm screws securing the auxiliary port module.
-
-
-
Squeeze the locking tabs on the white connector to release the auxilliary port cable.
-
If that doesn't work, use the point of a spudger to push on alternating sides of the connector to "walk" it out of its socket.
-
-
-
Push the white connector up from the socket with a spudger.
-
Pull the white connector out of the socket on the auxiliary module board.
-
To insert the new auxiliary port, follow these instructions in reverse order. Take your e-waste to an R2 or e-Stewards certified recycler.
