Pixel 10 Vibration Motor Installation

Use a spudger to scrape up and remove any bits of vibration motor adhesive from the frame.

Wrap a spudger in a microfiber or lint‑free cloth and apply one drop of high‑concentration (>90%) isopropyl alcohol.

Use the spudger to clean up any adhesive residue from the vibration motor's spot on the frame.

Allow the alcohol to dry completely before continuing.

Cut strips of thin, double‑sided tape and apply them to the bottom of the vibration motor.

Lay the vibration motor into its recess so the gold contacts are facing up on the left side.

Firmly press the vibration motor into place to secure it with the adhesive.