Introdução
If your pickleball paddle grip tape is showing signs of wear, this quick guide will walk you through how to replace and rewrap your grip tape for better control and performance on the court.
Ferramentas
-
-
Remove the previous grip — start with the grip band and electrical tape at the top, then peel all the way down.
-
-
-
Peel off the adhesive strip on the back of the end of the tape, then apply it flush to the bottom of the paddle handle.
-
-
-
Cut from the bottom of the tape to the top at a shallow angle, then finish wrapping the tape around the shaft of the paddle.
-
-
-
Add about a half-inch-wide strip of electrical tape to the top of the handle to hold everything in place and cover with the grip band.
-
