Palm Treo 600 Keyboard Replacement

Escrito Por: Clement Poisson
  • Comentários: 0
Palm Treo 600 Keyboard Replacement

Dificuldade

Easy

Passos

6

Tempo necessário

10 minutes

Introdução

Replace the keyboard!!

  1. obnTCBVjIWtTQTIZ

    • On the back of the device, locate the 3 rubber plugs, and use a plastic spudger to remove them.

  2. YAem6KvW6JpdEyP3
    YAem6KvW6JpdEyP3
    AloIJ1q3GPojNAxU

    • Use the T6 Torx Screwdriver to remove all 4 screws.

    • You have to first remove the Stylus to access the 4th screw.

  3. VIXJeTyoDDosj5KB
    VIXJeTyoDDosj5KB
    UFI6ndJ5KKRBCNdA

    • Using a plastic opening tool, carefully separate the front and back cases.

    • Note: The antenna will detach from the phone.

  4. BRBBQuNaJHTBdIUs
    BRBBQuNaJHTBdIUs
    ekCmuEAXoIMQgCXw

    • Using a T6 Torx Screwdriver, remove the two screws.

    • The motherboard will now be loose from the front case.

  5. al5TDMhHeGyeJNCm

    • Using the spudger, flip open the clasp that holds the data ribbon in place.

  6. kZtFTWTT4dAWOhyZ

    • Pull out the ribbon.

    • The keyboard will disconnect from the phone.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

Clement Poisson

Membro desde: 26/01/10

24 Reputação

0 comentários