Introdução
Is the heel brake on your PAPASION A306S damaged, worn, or extremely dirty? If you find yourself having trouble with the heel piece reaching the ground to aid in stoppage, it may be worn down and need replacing. However, it may just need its angle adjusted.
If either of these problems occur, this guide will show you how to remove the heel brake on your PAPASION A306S. Check the troubleshooting page first to confirm if there are any other underlying issues.
Ferramentas
-
-
Insert a hex screwdriver into one side of the heel piece.
-
Insert another hex screwdriver into the other side of the heel piece.
-
Hold one side steady while loosening the screw from the opposite side until it comes free.
-
Conclusão
To reassemble your device, follow these instructions in reverse order.
