Introdução

The KP72 Series of the Ovente Electric Kettle is susceptible to issues with overheating and electrical malfunction, which can cause permanent issues to the product. To address these issues, this guide will cover how to replace the thermostat, a key component to the function of the electric kettle and a common source of these problems. Following this guide requires knowledge of the use of a multimeter and electrical safety protocol.

  1. SWvMZggdjkyY36eW
    SWvMZggdjkyY36eW
    leFZwTD4qnLjuQZy
    • Unplug the kettle's plug from the wall socket.

  2. 1vjcnGQudeUVrbYR
    1vjcnGQudeUVrbYR
    5jVtwik31KY6m56x
    TEADNpGKJI1UlY4J
    • Remove the screws from the bottom cover of the kettle using a screwdriver.

    • Make sure theres no water on or in the kettle when removing the bottom cover.

  3. LTd3MvxomUVKrNNA
    LTd3MvxomUVKrNNA
    V6sRDWpiVKijyIry
    52GrPopjJBUsInAp
    • Remove the cover from the bottom of the kettle.

  4. JmVWLCnsMpBNXBvU
    JmVWLCnsMpBNXBvU
    iVMlH2ekSSwpFbHd
    B1yRbKyg1gGDILJG
    • Remove the metallic bottom ring.

  5. Oic1uHklLVZqmgbN
    Oic1uHklLVZqmgbN
    GJGbDtrklKDTfAct
    urhGHRbRUZNDehCB
    • Remove the screws from the thermostat on the base.

  6. YyOBJTiLxWMlvxQO
    YyOBJTiLxWMlvxQO
    XwLaWDlKG6GgONmY
    Vrcoj6S2ACscbK4C
    • Remove the thermostat.

  7. GgMq5GgG5Pnjh3VQ
    GgMq5GgG5Pnjh3VQ
    ov6MBSCMvTjmCppB
    SPXBykYZCNU3V4g4
    • Use a multimeter to check the resistance of the heating coil.

    • The measured resistance should be around 14 ohms.

  8. 1SbFWJxi2K1lVntb
    1SbFWJxi2K1lVntb
    Ap5qFWUOMtAbirsn
    cHNFsUmGfdJ6KEy4
    • Replace the thermostat by placing it back on the breaker pad and screwing it into place.

  9. 2GURlKIrwHeMpO3d
    2GURlKIrwHeMpO3d
    qVttcKURITKWrwVb
    yiCu3UV6PJd5HTaj
    • Place the bottom back into place and screw closed.

Ezana Tesfaye

Membro desde: 09/10/25

169 Reputação

0 comentários