Introdução

  1. FVK52clAsmAPmXM5
    FVK52clAsmAPmXM5
    aEDRythgTVAmmNmy
    f2BPgZZ1Z5xxjToj
    • Carefully use an opening tool to pry the bottom cap loose.

    • You’ll notice a spring comes out too; be careful not to misplace it.

    Where to get the replacement cap?

    therock -

    I would love to know this as well

    Toni Parkkinen -

    You can the cap easier get open, if you stuck the charger in its port and wrist it..

    pury -

  2. ln2KdJGXIPpOLDLJ
    ln2KdJGXIPpOLDLJ
    Q2ZT2UrWePVHqPgf
    lWtCk3ibhvbw15Pc
    • Carefully detach the toothbrush head by pulling it off.

    • Attach the replacement head to the same spot where the original head was removed.

  3. bCxsFTyRHjB4STjW
    bCxsFTyRHjB4STjW
    kfPhBRw5lhoHQJTY
    • Carefully remove the metal casing that holds the head and body together.

  4. hilMyTgFV5NMUB6m
    hilMyTgFV5NMUB6m
    tFCusUOPrUkWBcYj
    vXJ4CxLlLsY6juqT
    • Carefully push the internal mechanisms out through the opening left by the removed bottom cap.

  5. 2WnN2kOCyDU3DYRS
    2WnN2kOCyDU3DYRS
    uNsfDWIimK4jyFTs
    avJiw5SlfSTUV1gX
    • Flip the internal components to access the other side.

    • Apply gentle pressure to the clear plastic component and pull upward from the area where the head was previously attached.

  6. cduNNSHDP5iHNLcl
    cduNNSHDP5iHNLcl
    vXvJAw1c1eIWMkAq
    leRw5eCMCloJE2eb
    • Using a slender tool, gently push the pin through.

  7. e2F1ODmHuDARIxu1
    e2F1ODmHuDARIxu1
    ZG3irUBJHDUS1Obb
    h1SPsTiMfDZiGksU
    • Remove the two screws positioned on either side of the plastic casing.

  8. nIqalWhDjKVafVG4
    nIqalWhDjKVafVG4
    sHHn16CnASxxg6ys
    • Carefully unclip the motor from the battery compartment to detach it.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Ethan Cobb

Membro desde: 19/03/25

483 Reputação

0 comentários