Introdução

  1. NUUhUYyRPWvb2VMn
    NUUhUYyRPWvb2VMn
    RvyWrV4KFqZLp2dS
    mh3rasY2wXIrRtLy
    • Insert a SIM card eject tool into the hole on the side of the phone, just below the SIM tray.

    • Press firmly to release the tray, then pull it out the rest of the way.

  2. 6CoT1QrQmLAFfMQR
    • Use a heat gun to loosen the glue on the back cover.

    • Be sure to also heat the glue around the fingerprint button (this can be done at the end of this step to make it easier).

  3. SVqmGpS41JqMbt6L
    • Place the suction cup onto the back and squeeze. Gently pull on the suction cup. Meanwhile, insert a prying tool between the back cover and the side to scrape the glue. Slowly remove the back.

  4. cqtm3fYlTG3Aippl
    • Grab the screwdriver. Point the tip of the screwdriver, shaped like a plus sign, at the plus sign on the top of a screw. Insert the screwdriver into the slot and rotate counterclockwise until the screw is loose. Repeat this to unscrew the four screws around the camara lens. Then, carefully remove the lens.

Conclusão

To reassemble your device, follow these instructions in reverse order. Apply new adhesive where necessary after cleaning the relevant areas with isopropyl alcohol (>90%). Take your e-waste to an R2 or e-Stewards certified recycler.

Piper Wolf

Membro desde: 12/09/25

445 Reputação

0 comentários