OnePlus Nord CE Speaker and Vibrator Assembly Replacement

Escrito Por: Axel Karjalainen
  • Comentários: 0
OnePlus Nord CE Speaker and Vibrator Assembly Replacement

Dificuldade

Moderate

Passos

4

Tempo necessário

10 minutes

Introdução

The main speaker and the vibrator are combined into one assembly on the OnePlus Nord CE.

    • Remove the back cover by lifting it up with a Suction Handle and wedging an Opening Pick under it.

    • Heating it up with an iOpener may help ease up the adhesive holding on the back cover.

    • Remove the SIM card tray near the selfie camera. (top-right when viewing from the back side of the phone with the charger port pointing down)

    • Remove 18 Phillips #00 screws from the rear housing.

    • The rear housing is held on by clips. Wedge an Opening Pick between the side rim (same appearance as the back cover) and the midframe's rigid outer rim (black). It's easiest to begin unclipping by starting near the SIM card or side button cut-outs.

    • Continue unclipping the rear housing all around and unstick the plastic piece with adhesive.

    • Pry the battery connector up using a Spudger.

    • Make sure the contacts do not touch.

    • Remove one Phillips #00 screw on top of the speaker and vibrator assembly.

    • Unclip the speaker and vibrator assembly from the midframe by compressing it horizontally.

Conclusão

Now you can replace the main speaker.

To reassemble your device, follow these instructions in reverse order.

Autor(a)

Axel Karjalainen

Membro desde: 14/11/25

458 Reputação

0 comentários