ORFELD EV-660-S222 Roller Brush Replacement

Escrito Por: Kristen Gismondi
  • Comentários: 2
ORFELD EV-660-S222 Roller Brush Replacement

Dificuldade

Moderate

Passos

2

Tempo necessário

No estimate

Introdução

  1. XCnPGTAkmx6K6Gdc

    • Place the roller attachment bottom side up so you may access the brush.

    • Apply pressure with the iFixit opening tool to the tabbed side of the orange cap to release the roller brush.

  2. pZqJbN1x2CgVdHkU

    • Pull the roller brush from its socket one side at a time to remove it.

    Clip that holds brush assembly missing

    Bguz -

Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

Kristen Gismondi

Membro desde: 12/11/14

103918 Reputação

Um comentário

My orfeld ev 660 has a problem pick up brush.It will turn a few times and then stops.I can get the diamond shaped driver to keep turning but when I snap in the brush itsel..it will not turn the brush.Any help would be appreciated

gary -