Nokia 6350-1b Display Screen Replacement

Escrito Por: Anna
  • Comentários: 1
Nokia 6350-1b Display Screen Replacement

Dificuldade

Moderate

Passos

6

Tempo necessário

30 minutes

Introdução

Use this guide to replace the display screen of the Nokia 6350-1b cellphone.

  1. fboaIG2W3p2p51DD
    fboaIG2W3p2p51DD
    RakQ2ph2rlVkREOy

    • Using an iFixit opening tool, separate the plastic frame and the rest of the phone.

    • Move the opening tool along the frame, unlocking all of the locks that keep the frame in place.

    • Remove the plastic frame and set aside.

    • Be careful not to pry too hard; doing so could crack the plastic frame.

  2. HadDImURKH4IH24A

    • Using a T-5 screw driver, unscrew the screws on the four corners of the phone.

    • Using an opening tool, pry between the screen cover (top left) and the phone frame (top right).

    • To separate, unlock the various groove-like locks on all four sides of the phone.

    • Carefully remove the screen cover (top left) to reveal the logic board (bottom).

    • Keep track of the four small screws. They will be needed to put the phone back together.

  3. nj1fNGZEnZqE24WW

    • Disconnect the flex cable from the logic board.

    • Disconnect the damaged LCD display screen and remove from the device.

    • Remember to dispose of the damaged LCD display screen responsibly; do not throw away with household trash, as electronic parts are considered household hazardous waste (HHW).

  4. Lc2Qq5brW1wUBtTs

    • Connect the new LCD display screen to the phone.

    • Reconnect the logic board (bottom right) to the flex cable (gold tab).

  5. 6lE5uJYPjYHIqgtT

    • Using the T-5 screwdriver, screw the four screws back into the phone.

  6. bOd1OrtYpbE5pZNY

    • Place the cover back on the device so that it is in the correct position to be reinstalled. Use the opening tool from earlier to direct the cover with precision.

    • Press gently on the cover so that it snaps back into place.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

Anna

Membro desde: 13/04/12

25 Reputação

Um comentário

Hi

Thanks for putting these together. I have a flip phone 6350 and I love it. Every time one stops functioning I get another one used. But I often have problems with the charging ports. The connection gets wonky and only works when I move the plug around in the socket of the phone. Can these be easily replaced? fixed? I even tried using a universal charger and charged the batteries in that, but then the battery connections stopped working.

thanks!

Annemarie

Annemarie Heineman -