Introdução
-
-
Align the right Joy‑Con 2 connector cable with its cutout in the frame.
-
Carefully thread the cable through its cutout so the cable reaches its connector on the board.
-
If the silver sticker beneath the cable was removed, adhere it to the bottom of the cable.
-
-
-
Use a JIS 00 driver to remove the two 3.2 mm‑long black screws securing the right Joy‑Con 2 connector.
-
-
-
Insert the right Joy‑Con 2 connector cable into its ZIF connector on the board until it's fully seated.
-
Flip the hinged locking flap down to secure the cable.
-
Conclusão
To reassemble your device, follow these instructions in reverse order.
