Introdução
Ferramentas
-
-
Align the kickstand so its hinge covers are facing the back cover.
-
Insert the hinges through their slots in the back cover and set the kickstand into its cutout.
-
-
-
Use a JIS 00 driver to install the two 2.3 mm‑long silver screws securing each hinge to the inside of the back cover (four total).
-
-
-
Align one of the upper hinge covers with its respective hinge, and slide it underneath the lower hinge cover.
-
Use your finger to press the upper hinge cover down until it clicks into place.
-
Conclusão
To reassemble your device, follow these instructions in reverse order.
